IntelliTrac v2
Modular Broadcast Furniture System
IntelliTrac v2
Modular Broadcast Furniture System
Standard IntelliTrac Console Features
For additional features and further information, please refer to our product guide in the downloads section below.
1
2
3
4
5
6
7
8
1
Modular Rack Turrets available in 2RU and 4RU Heights, vented, and removable with 10-32 tap front rack rail (standad matte black finish)
2
Durable linoleum countertop with black T-mold bumper edge. Core material: 1.125″(28.5mm) thick MDF. (Optional finishes available)
3
Vented HDPE access panels for full access to equipment. (Standard black finish)
4
Flat panel monitor arms (optional). Available in single and dual configurations. Accessory arms also available.
5
Dual hinged vented metal lid flips up, also removable for full access to cables. (Standard black powder coat)
6
Extruded aluminum rear trac for LCD and accessory arms.
7
Silver thermofoil side panel. (Optional finishes available)
8
Formed steel support foot with levelers. (Standard silver powder coat)
Which IntelliTrac Console Version Fits My Needs?
The decision making process in choosing a console often involves the following factors – space limitations, monitor size, rack equipment needs, and budget. Below are some of the dimensional requirements of our standard IntelliTrac products.
Click above to learn more about these options
T22 SECTION
T26 SECTION
T30 SECTION
HD22 SECTION
HD26 SECTION
HD30 SECTION
All designs, plans, ideas and specifications indicated in this drawing remain the entire property of TBC Consoles Inc., and may not be used in any manner without prior written consent.
Turrets removed for clear view into base.
Power Strip (PS-2015-ET) shown in typical mounting location inside Intellitrac console base (shown right). These powerstrips are also available with locking plugs (Twist-Lock), junction box for hardwire applications, 20 amp, and international versions. We can also provide Power Distribution Units with IEC 60320/C13 outlets in 120V and 240V versions.
IntelliTrac Cabling
intelliTrac Cabling with Fiber Optic Tray
FiTT Leg to Floor Cabling
T22
T26
T30
Turrets shown above are representative stocked sizes, custom units are available to accommodate nearly any equipment size.
Deep Turrets can be made as well if needed. Click the image to the left to view comparisons.
World class ergonomics and impressive aesthetics aside, what makes the IntelliTrac control room consoles truly special is its highly adaptable nature.
T Series
The T Series comes in three depths (T22, T26, and T30) to best meet each client’s specific mix of technical, spatial, and operational requirements. All three depths can accommodate up 7 RU of equipment space in the base cabinet.
For each of the three depths the basic ‘building blocks’ of the lntelliTrac console system are the Starting Bays and the Running Bays. The T Series comes in only 19” wide bay modules. These modules include: feet (as required), wire mesh cable tray, front and rear device Tracs for monitor and accessory mounting, vented and removable ABS lower cabinet doors (front & rear). Additional accessories sold separately.
Note that lntelliTrac consoles cannot be configured with more than one depth. But consoles of different depths can used in a control or facility with no distinguishable difference other than the depth.
lntelliTrac T Series is priced and designed ‘per bay’, but is manufactured according to final length (ex. 4-bay console). This is done to ensure smooth function and appearance of the extruded aluminum device tracks.
HD Series
The HD Series was created to provide additional equipment capacity in the lower cabinet area than in the T Series. The HD Series comes in three depths (HD22, HD26 and HD30) to best meet each client’s specific mix of technical, spatial, and operational requirements. All depths can accommodate up to 9 RU of equipment in the base cabinet.
For all three depths the basic ‘building blocks’ of the lntelliTrac console system are the Starting Bays and the Running Bays. The HD Series comes in both 19” and 25” wide bay modules. These modules include: feet (as required), wire mesh cable tray, front and rear device Tracs for monitor and accessory mounting, vented and removable ABS lower cabinet doors (front & rear). Additional accessories sold separately.
Note that lntelliTrac consoles cannot be configured with more than one depth. But consoles of different depths can used in a control or facility with no distinguishable difference other than the depth.
lntelliTrac HD Series is priced and designed ‘per bay’, but is manufactured according to final length (ex. 4-bay console). This is done to ensure smooth function and appearance of the extruded aluminum device tracks.
FiTT
The FiTT series simplifies our IntelliTrac offering with an above the floor design and minimal rack-mounted equipment. FiTT is designed to utilize a custom turret which can optionally cover the front trac when it is not needed or when the operator needs better reach to their equipment. Robust cable management is available up through the floor with access panels available for access.
Note that the FiTT console can be designed in two different depths and is priced and designed “per bay” as with the rest of the line.
View IntelliTrac Configurations
T Series – Adaptable and Modular Control Room Furniture
The T Series comes in three depths (T22, T26, and T30) to best meet each client’s specific mix of technical, spatial, and operational requirements. All three depths can accommodate up 7 RU of equipment space in the base cabinet.
HD Series – Control Room Furniture with Extra Depth
The HD Series was created to provide additional equipment capacity in the lower cabinet area than in the T Series. The HD Series comes in three depths (HD22, HD26 and HD30) to best meet each client’s specific mix of technical, spatial, and operational requirements. All depths can accommodate up to 9 RU of equipment in the base cabinet.
FiTT Series – Modern Control Room Furniture
The FiTT Series is designed as an IntelliTrac console without the need for robust storage space under the countertop.
