ControlTrac

ControlTrac

Premium Mission Critical Consoles

Control room technical furniture specifically designed to accommodate control room environments. Available fixed height or height-adjustable versions.

Standard CTL Features

1
2
3
4
5
6
1

Variety of countertop options (seen here in blue acrylic).

2

Optional space for dropwells or rack turrets.

3

Vented HDPE access panels for access to equipment (optional steel doors)

4

3DL thermofoil side panels.

5

Extruded aluminum rear trac for monitor frame or articulating arms with cable management troughs.

6

Under counter space for CPUs or other equipment.

Standard C3 Features

1
2
3
4
5
6
7
8
9
10
11
12
1

Environmental control unit

2

Variety of countertop options (seen here in kyoto laminate with Purtech® edge)

3

Standard thermostat with temperature indicator within CPU storage and optional cooling fans

4

End panel available in a variety of heights and finishes

5

Vented laminate or metal doors available with locking mechanisms.  Optional CPU platform or front pull-out CPU shelf.

6

Height-adjustment system with anti-collision function that senses solid objects and reserves to prevent damage.  Easy access to all mechanisms to avoid any downtime in a 24/7 facility.

7

Toolless rear cable access panels with brushstrip.

8

Rear extruded aluminum monitor and accessory mounting system

9

Enclosed cable chains for optimal protection.

10

Vented laminate or metal doors available with locking mechanisms.  Optional platform or rear pull-out  CPU shelf.

11

Customizable rear panels in various heights and finishes.

12

Optional rear plexi privacy screen

Which ControlTrac Version Fits My Needs?

CTL Series Section

C3 Series Section

All designs, plans, ideas and specifications indicated in this drawing remain the entire property of TBC Consoles Inc., and may not be used in any manner without prior written consent.

Height Adjustable “Sit/Stand” Version

Fixed Height Version

All designs, plans, ideas and specifications indicated in this drawing remain the entire property of TBC Consoles Inc., and may not be used in any manner without prior written consent.

CTL Series Turret Depths

CTL-RT2

CTL Series CT-RT4

CTL-RT4

CTL Series CT-RT8

CTL-RT8

C3-RT2

C3-RT4

C3-RT8

*Turrets come standard in 2-6,and 8RU with custom solutions available. Rack rail comes in 10-32, 12-24, M5, M6, or cage nut.

Turrets removed for clear view into base.

Power Strip (PS-2015-ET) shown in typical mounting location inside ControlTrac console base (shown below). These powerstrips are also available with locking plugs (Twist-Lock), junction box for hardwire applications, 20 amp, and international versions. We can also provide Power Distribution Units with IEC 60320/C13 outlets in 120V and 240V versions.

Standard CTL Cabling

CTL Riser for CPU Clearance

Height Adjustable C3 Internal Cabling

Fixed Height C3 Electrical Cabling

ControlTrac technical furniture is best suited for a slimmer equipment or CPU storage rather than an abundance of above countertop rack equipment.

CTL Series

The CTL Series comes in only a single depth but comes in two different width bay modules 19” and 25”.  These building blocks include: rear rack rail, wire mesh cable tray, rear device tracks for LCD and accessory mounting, vented and removable vented bottom access panels.

C3 Series

The C3 Series is capable of lifting 500 lbs [227 kg]  of weight with 26” [660mm] range of height adjustability with anti-collision sensors built into the motors. There are provisions  for CPUs or file cabinets in the base, as well as an optional rear shroud which is built into the console.

View ControlTrac Configurations

CTL Series

The CTL Series comes in only a single depth but comes in two different width bay modules 19” and 25” and can be specified by the foot. When specified by the foot the stanchions will need to be added also. These building blocks include: Front and rear rack rail, height adjustable wire mesh cable tray, Rear device tracks for LCD and accessory mounting, vented and removable vented bottom access panels.

CTL-SB Concept: 1 Position Console

1 – 19” bay + 2 – 25” bays, with 2RU turret, infill panels and countertop. Base cabinet capable of holding 9 RU of equipment and 2 CPU towers mounted on pullout shelves.

Overall length: 6’- 5 15116” [1990mm]
Overall depth: 2’- 11 15116” [913mm]

CTL-AC Concept: 3 Position Console

2 bay + 3 bay + 3 bay + 3 bay + 2 bay, 4 – 45° transitions, base cabinet capable of holding 13 bays of 9 RU of equipment.

Overall length: 218 15/16” [5561.01mm]
Overall console depth: 119 9/16” [3036.89mm]

C3 Series

Ultimate Modularity and Ergonomics. A console that allows an electronic height adjustment range of 26” [660mm] for desktop surface, rack turrets, and monitors provides true sit/stand functionality.

C3 Linear Concept: 1 Position Console

Shown with: C3 modules (28” + 28”),  STX monitor arms, countertop shown with linoleum with puretech edge and 3DL kydex end panels.

Overall length: 6’- 5” (1981mm]
Overall depth: 3’- 5” [1066mm]

C3 Security Concept: 2-5 Position Console

Shown with: C3 (5) 28” bays + (2) 45° transitions with infill panels, 2 tier monitor frame – countertop shown in linoleum with puretech edge and 3DL kydex end panels.

Overall length: 22’ 10” [6958mm]
Overall depth: 7’- 3” [2205mm]